Shopping Cart
Edit cart-
×
B-Line Black Cone NozzleItem: 873-31 × $1.67 = $1.67
Subtotal: $1.67
B12S30 Schematic
Albion B12S30 B-Line Manual Sausage Gun Parts Reference
Keep your B12S30 B-Line Manual Sausage Gun operating at peak performance with genuine Albion replacement parts. Use the schematic diagram below to identify the exact component you need. We have everyday consumable items like narrow nozzles (Item 17) and sausage pistons (Item 5) to complete gripping plate and spring rebuild kits (Item 11). Locate the item number on the diagram, match it to the corresponding row in the index below, select your required quantity, and click Add to Cart to update your order instantly without leaving the page.
| Item # | Part # | Description | Std Qty | Quantity |
|---|---|---|---|---|
| 1 | 873-5 | FRONT CAP | 2 | |
| 2 | 873-115 | BARREL | 1 | Not Sold Separately |
| 3 | 37-50 | NYLOC NUT | 1 | Not Sold Separately |
| 4 | 39-111 | WASHER | 1 | Not Sold Separately |
| 5 | 873-6 | SAUSAGE PISTON | 3 | |
| 6 | 873-10 | PISTON WASHER | 1 | Not Sold Separately |
| 7 | 37-51 | JAM NUT | 1 | Not Sold Separately |
| 8 | 873-22 | PISTON REPLACEMENT KIT | — | |
| 9 | 873-99 | BACKCAP WASHER | 1 | Not Sold Separately |
| 10 | 873-98 | BACKCAP SPACER | 1 | Not Sold Separately |
| 11 | 873-40 | GRIPPING PLATE/SPRING KIT | 1 | |
| 12 | 873-103 | HANDLE/TRIGGER KIT | 1 | Not Sold Separately |
| 13 | 873-39 | RECOIL/SPRING/PIN KIT | 1 | |
| 14 | 873-23 | PULL | 1 | |
| 15 | 873-41 | PULL NUT | 2 | |
| 16 | 873-3 | CONE NOZZLE | 3 | |
| 17 | 873-2 | NARROW NOZZLE | 3 | |
| 18 | 873-35 | BULK PISTON | 1 | |
| 19 | 873-114 | ROD | 1 | Not Sold Separately |
| 20 | 310-3 | HOOK PULL | 1 | |
| 21 | 935-4 | BENT CONE NOZZLE (SOLD SEPARATELY) | — | |
| 22 | 10-136 | SCREW | 3 | Not Sold Separately |
Frequently Asked Questions
How do I convert my Albion B12S30 between sausage packs, cartridges, and bulk dispensing?
The Albion B12S30 features a highly adaptable internal drive rod. To prevent material blow-by or mechanical jamming, configure your piston stack based on your material packaging:
- For Sausage Packs: Ensure the black polyplastic 873-6 Sausage Piston (Item 5) is installed on the rod, supported from behind by the steel 873-10 Piston Washer (Item 6). This creates a full 2-inch seal against the barrel walls to cleanly deflate foil sausage bags without wrapping or binding.
- For Rigid Cartridges (10oz / 12oz): Remove the plastic Sausage Piston (Item 5) completely. Because a rigid cartridge shell is narrower than the gun's barrel, the 2-inch plastic cup will block it. Adjust your backing nut halfway up the threads and use only the bare steel 873-10 Piston Washer (Item 6) to reach inside the cartridge and press its rear plunger forward.
- For Bulk Pail Material (Suction Loading): Strip the sausage components off the rod entirely and substitute the specialized 873-35 Bulk Piston (Item 18). This configuration creates the heavy-duty vacuum seal required to pull loose material straight up into the 873-115 Barrel (Item 2) without bypass leakage.
Which specialized nozzle upgrades are available for the 873-5 Front Cap?
To optimize your material output profile, you can swap out standard nozzles for application-specific accessories designed to thread perfectly onto the 873-5 Front Cap (Item 1):
- 935-4 Bent Cone Nozzle (Item 21): Specially angled at 45° for hard-to-reach joints, log chinking corners, and technical window perimeters where straight access is blocked.